GymDandy "FREE" Plans & Planes


All parts for GymDandy "Free" Plans are available at : BSD Micro RC

To print hard copy : 1. Click on Button at Right of picture to open desired view. 2. Right click on opened view, then click on "save picture as" and give your picture a name and save it. 3. Then go to the name file of your saved picture, you can now open the file and print it. and it should turn out in proper scale and orientation.                  ( Do not try to print directly from website. )



  P-51 MUSTANG    Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately 32-34 gram.



  CORSAIR F4U   Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately 32-34 gram.


  OKIE DOKIE    Designed By : Jerry Combs

                                                    INDOOR FREE FLIGHT   ( Rubber Band )                                          Wingspan 40 cm,  Flying weight approximately 8 gram.,  per Science Olympiad rules for 2004


  Combs A-6    Designed By : Jerry Combs

                                                    INDOOR FREE FLIGHT   ( Rubber Band )                                          Wingspan 14.5 inches,  Flying weight approximately 1.3 gram.



  HELLCAT   Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately 32-34 gram.



  FOCKE-WULF 190   Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately 32-34 gram.



  P-40   Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately 32-34 gram.



  ZERO   Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately 32-34 gram.



 SPIRIT OF ST LOUIS   ( Photo Not Available ) Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 17.5 inches,  Flying weight approximately ? gram.



 TBM-3 AVENGER   Designed and Drawn By : Ken Spencer

                                                    INDOOR RADIO CONTROL   (3 channel R/C printed profile)       Designed for M-20 with 4,2 gear ratio, JMP COMBO Receiver, Selman Actuators, and Lithium Polymer Cell.               Wingspan 16.5 inches,  Flying weight approximately ? gram.



All parts for GymDandy "Free" Plans are available at : BSD Micro RC

To print hard copy : 1. Click on Button at Right of picture to open desired view. 2. Right click on opened view, then click on "save picture as" and give your picture a name and save it. 3. Then go to the name file of your saved picture, you can now open the file and print it. and it should turn out in proper scale and orientation.                  ( Do not try to print directly from website. )